Friday, August 14, 2009

New Product Review MLCS 6-Piece Pro Cabinetmaker Bit Set


MLCS 6-Piece Pro Cabinetmaker Bit Set For Full Review and Video Review Go To http://www.newwoodworker.com/reviews/mlcssetrvu.html

MLCS 6 Piece Pro Cabinetmaker Bit Set
All of the MLCS 6-Piece Pro Cabinetmaker Bit Set bits made clean precise cuts right out of the box. Setup of all of the included profiles was easy and quickly confirmed with test cuts. Even the matched rail and stile bits cut a perfect fitting joint so I did not have to even open the included shim pack. I like a rail and stile joint to go together easily so that it accepts glue without having to increase pressure to close it fully. The MLCS matched set was adjusted perfectly at the factory for that fit...
The panel raising bit with undercutter produces a very clean, consistent thickness edge. I also found that edge to be properly sized for the groove cut by the rail and stile set. That gives the panel a nice floating fit within the rails and stiles that will not inhibit expansion/contraction cycles...
Despite the economical price the MLCS 6-Piece Pro Cabinetmaker Bit Set uses C2 carbide for the cutting edges...
The MLCS 6-Piece Pro Cabinetmaker Bit Set comes with a handy shim pack that includes a bunch of shims along with extra lock washers and nuts for the bits. These shims are intended for adjusting the fit of the rail and stile joint...
The MLCS 6-Piece Pro Cabinetmaker Bit Set also comes with a nice wooden box for storing the bits when not in use.

New Product - The Fast Joint Percision Joinery System


Create Unique, Strong Joints Quickly and Easily.

Unique jointing system makes creative, custom joinery fast and simple. Insert your bit in the router, insert a guide bushing into your router table insert, set your bit height and you're ready to go. Set male and female templates on opposite sides of the jig platform and start cutting. For stock 1/4" to 3/4" thick (1/4" to 3/8" for through dovetails) and up to 14" wide. Choose from a wide variety of optional decorative and interesting joint profiles to "spice up" standard joints. Two different sets available (4 or 11 templates)! Use on table mounted routers only.

INSTRUCTIONS INCLUDED! Comes with a 30+ page, full color, step-by-step instruction booklet.